Case study★ Team projectDec 2024 – Apr 2025

FeelAquaAn Inclusive Water Bottle

Leadership · UX Research · Inclusive Design · Accessibility

FeelAqua bottle rendering: lavender and apricot body, ribbed orange water-level band, cream ribbed lid, yellow spout cap on an orange strap
Type
Team Project · 5 Members
Role
Team Lead
UX Researcher & Designer
Timeline
2024 – 2025
Skills
Research Planning · Team Facilitation · Inclusive Design · Interaction Design · Concept Evaluation
00Overview

Find. Fill. Drink.

FeelAquareimaginestheeverydaywaterbottleforpeoplewhoareblindorhavelowvision.Throughtactilewater-levelfeedback,anintuitivelid,andaportabledesign,itmakeshydrationeasiertonavigatewithoutrelyingonsight.Hereisthefinalconceptbeforethestoryofhowwegotthere.

01
Find
A textured lid and integrated strap help users locate, grip, and open the bottle without relying on sight.
Image · Find
02
Fill
A tactile silicone band provides a reference point for monitoring the water level while filling, helping prevent overflow.
Image · Fill
03
Drink
Distinct textures make the drinking spout easy to identify, while a tethered cap reduces the risk of losing small components.
Image · Drink
Drag to rotate
The final bottle in 3D. Drag to look around, scroll to zoom in.
Tactile Water-Level Indicator
An upper tactile band designed to help blind users sense when the water reaches a designated level while filling.
Tethered Spout Cap
A textured spout cap stays attached to the bottle, making it easier to locate and reducing the risk of loss.
Wide Ribbed Lid
Deep ribs give grip and make the big opening easy to find and tell apart from the spout.
Non-Slip Grip
Raised ribs along the body provide additional friction, supporting a more secure grip during everyday use.
Guided Grip
A smooth surface contrasts with the ribbed sections, creating a recognizable area for everyday handling.
Non-Slip Base
A proposed silicone base increases friction with surfaces, helping reduce accidental sliding.
01The Challenge

What if the people we designed for were hard to reach?

We planned to research with blind participants, but school funding for recruitment and compensation fell through. With a limited budget, the team had to rethink how to research at all.

1
The split
Recruit blind participants, even if we pay ourselves.
Protects research rigour
VS
Don't push the cost of a course project onto individuals.
Protects financial fairness
Both sides cared about users. Without a shared way to decide, the discussion kept going in circles.
2
What I did as team lead
Reframed the question
Before
Who pays?
After
How do we keep the research useful without anyone paying?
01
Separate people from the problem
I framed the budget and research plan as a shared problem, rather than blaming individual members.
02
Focus on interests, not positions
I helped the team recognise two key concerns: research quality and financial fairness.
03
Invent options for mutual gain
We explored personal funding, low-cost recruitment and blindfolded task simulations.
04
Insist on objective criteria
We compared options on cost, recruitment time, evidence quality and feasibility.
Compared options on shared criteria
I guided the team in comparing research options based on:
CostTimelineResearch validityFeasibilityEthical limitations
A
Team pays
B
Partner recruitment
CChosen
Blindfolded simulation
CostPersonal expensePotentially lowerLow
TimeTime to recruitTime to coordinateQuick to arrange
ValidityDirect user experienceDirect user experienceExploratory only
FeasibleDepends on fundingDepends on partnersEasy to organise
EthicsFinancial pressure on teamConsent and compensationNot lived experience
3
Where we landed
No one paid, and the research kept moving.

The team agreed on a plan everyone could support. It kept the project moving within budget, and we were clear about what it could and could not tell us:

Decision
A blindfolded task simulation with sighted participants.
Result
Research continued, with no personal cost to anyone.
Limit
Blindfolding cannot reproduce the lived experience of blind users.
02Research

What happens when vision isn't an option?

With recruitment limited, we ran a blindfolded task simulation. The aim was not to stand in for blind users, but to find where everyday bottle tasks break down when you can't see.

2.1

How we ran it

Sighted adult volunteers wore a blindfold and worked through four everyday tasks while thinking aloud. A facilitator observed and noted actions, pauses and requests for help. The setup was kept safe: room-temperature water, no glass, a tray for spills, and the option to stop at any time.
Task 01
Locate & Orient
Find the bottle and work out where the lid and grip are.
We watched
Search path, how they confirm, where they hesitate
Task 02
Open & Reclose
Identify the lid, open it and close it again.
We watched
Turning direction, slips, repeated trial and error
Task 03
Fill & Detect
Pour water over a tray and decide when to stop.
We watched
Which sounds, touch or weight cues they rely on
Task 04
Grip & Drink
Pick it up, drink and put it back.
We watched
Stability, use of both hands, effort
Study photo · blindfolded task session
2.2

What surfaced

We grouped what we saw with affinity mapping. These are early hypotheses to explore, not measured results.
Water-level awareness
Without sight, there may be little to tell you the bottle is almost full.
Design question
How might the bottle say “almost full” through touch?
Lid discoverability
Telling the lid apart and finding which way it opens may take trial and error.
Design question
How can each opening feel clearly different?
Grip & orientation
Knowing which way the bottle faces and where to hold it may need searching.
Design question
Where should texture guide the hand?
Limitation
Blindfolded sighted volunteers cannot represent the lived experience, training and strategies of blind users.
Future Validation
Given the opportunity to continue this project, I would work directly with blind and low-vision participants to evaluate and refine the concept.
03Design Opportunities

The smallest interactions can matter most.

The research pointed to three moments where sight is quietly assumed. Each became a design opportunity to explore.

What we noticed
What we designed for
01
Water-level awareness
Without sight, it's hard to judge how much has been poured and when to stop.
Nonvisual water-level feedback
Communicate the water level through a change you can feel, not see.
02
Tactile orientation
Without clear tactile cues, finding the lid and where to act takes repeated searching.
Intuitive lid interaction
Distinct textures and simple logic make the lid easy to find, open and close.
03
Grip & handling
Grip shape and texture affect locating, holding steady and confidence.
Secure & comfortable grip
Refine the grip zone, texture and body form for steady, comfortable use.
Non-slip base
A proposed silicone base increases friction with surfaces, helping reduce accidental sliding.
04Key Decisions

Touch became the interface.

Three opportunities had to become one concept. We went wide with Crazy 8s, combined ideas through a morphological analysis, and compared each combination against a typical bottle with a Pugh matrix.

Try it: build your own concept
Pick an option in each row and watch the bottle and its Pugh score change.
Water-level feedback
A soft band swells when the water nearly reaches it
Lid interaction
Flip it open with a thumb, snap it shut. No turning direction to guess.
Grip & handling
Raised ribs you can feel and hold
Cap retention
A soft strap ties the spout cap to the lid, so it can't get lost
Base stability
The lower body is grippy silicone that adds friction, so a bottle bumped while searching by touch is less likely to slide
★ = option in the selected concept
Your concept
This is our final choice
Pugh vs. typical bottleBaselineAn everyday screw-cap bottleScrew cap — needs two hands and a few turnsSmooth body — nothing to grip or feelNo water-level cue — you can't tell how full it is by touchScore
Non-visual operation+5
Structural feasibility−2
Ease of use+5
Manufacturing simplicity−4
Total+4
Illustrative scores: + better, 0 same, − worse than a typical bottle.
05Outcome

From design decisions to a tangible concept.

Each opportunity, as it ended up on the bottle.

Find · Anti-slip grip band
Find
Anti-slip grip band
Raised ribs tell your hand where to hold, and keep a wet bottle from slipping.
Fill
Tactile water-level band
The band swells as the water nears the top, so you feel when it's full.
Drink · Flip-top cap on a strap
Drink
Flip-top cap on a strap
Flip it open with a thumb. The strap keeps the cap with the bottle.
Set down · Non-slip silicone base
Set down
Non-slip silicone base
A grippy silicone base adds friction, so a bottle bumped by a searching hand is less likely to slide.
More renders
FeelAqua render 1FeelAqua render 3
FeelAqua render 2FeelAqua render 4
06Reflection

What I learned.

Understand concerns before comparing solutions.
When our team disagreed on how to continue the research, I learned that moving toward a decision required understanding what each member was trying to protect. As team lead, I would now make space for those concerns first, establish shared criteria, and then guide the team through the options.
Use simulation to explore, then question what it represents.
Without access to blind participants, we used simulation to explore non-visual interactions. This helped us identify possible difficulties, but left us unable to judge whether they reflected blind users’ everyday experiences. I learned to use these observations as starting points for design, while keeping assumptions open to question. Working within research constraints means being clear about what remains unknown, even when the project needs to move forward.
6.1

Next steps

Testing with blind and low-vision participants
Prototyping the tactile water-level band
Checking grip and base materials in everyday use
Refining how the flip-top and strap feel by touch
Making sure it still works for sighted users

Create a free website with Framer, the website builder loved by startups, designers and agencies.